Mathias Daniels
Shared posts
[ASAP] Strategic Construction of Sulfur-Bridged BODIPY Dimers and Oligomers as Heavy-Atom-Free Photosensitizers
[ASAP] Facile Synthesis of a Fully Fused, Three-Dimensional π-Conjugated Archimedean Cage with Magnetically Shielded Cavity
[ASAP] Access to Highly Luminescent N-Doped Diazaborepins with Penta-, Hexa-, and Heptagon Substructures
[ASAP] AgNO3 as Nitrogen Source for Cu-Catalyzed Cyclization of Oximes with Isocyanates: A Facile Route to N-2-Aryl-1,2,3-triazoles
Saucer[n]arenes: Synthesis, Structure, Complexation, and Guest‐Induced Circularly Polarized Luminescence Property
Starting from 2,7-dimethoxynaphthalene, a new kind of macrocyclic arenes named saucer[n]arenes (n=4,5) are synthesized by one-pot and templated methods. Saucer[n]arenes show strong fluorescence properties and form 1:1 complexes with various ammonium salts. Moreover, the chiral guests can induce the chirality of dynamically racemic saucer[n]arenes in the host–guest systems, which provides a new way to construct CPL organic materials.
Abstract
Macrocycles denoted as saucer[n]arenes (n=4,5) were easily synthesized by the one-pot condensation of 2,7-dimethoxynaphthalene (2,7-DMN) and paraformaldehyde in the presence of TFA or catalytic BF3⋅OEt2. With 1,1-dimethylpiperidin-1-ium as the template, saucer[4]arene was selectively obtained. Crystal structures show that saucer[n]arenes are all composed of 2,7-DMN moiety bridged by the methylene groups at 1,6-positions: all of the 7-methoxy groups lie on one face, and all of the 2-methoxy groups lie on the other. Saucer[n]arenes exhibit strong fluorescence properties with the quantum yields of 19.6 % and 23.4 %. They form 1:1 complexes with ammonium salts in both solution and solid state (association constant up to 105 M−1 in CDCl3). Chiral quaternary ammonium salts can induce the chirality of the dynamically racemic inherently chiral saucer[n]arenes in solution, and thus show mirror-imaged circular dichroism signals and circularly polarized luminescence (CPL) properties.
Antiaromatic 1,5‐Diaza‐s‐indacenes
1,5-Diaza-s-indacenes (see structure) were synthesized and found to exhibit distinct antiaromaticity as manifested by pronounced bond-length alternation, a forbidden HOMO–LUMO transition, and a paratropic ring current. As compared to the parent s-indacene, the 1,5-diaza-s-indacenes showed higher electron-accepting ability owing to the presence of imine-type nitrogen atoms.
Abstract
s-Indacene is a classical non-alternant hydrocarbon that contains 12 π-electrons in a cyclic π-conjugation system. Herein, we report its nitrogen-doped analogue, 1,5-diaza-s-indacene. 1,5-Diaza-s-indacenes were readily prepared from commercially available 2,5-dichlorobenzene-1,4-diamine through a two-step transformation consisting of a palladium-catalyzed Larock cyclization with diaryl acetylenes followed by hydrogen abstraction. The thus obtained 1,5-diaza-s-indacenes exhibited distinct antiaromaticity, as manifested in clear bond-length alternation, a forbidden HOMO–LUMO transition, and a paratropic ring current. As compared to the parent s-indacene, the 1,5-diaza-s-indacenes showed higher electron-accepting ability owing to the presence of imine-type nitrogen atoms. The 1,5-diaza-s-indacene core is effectively conjugated with the peripheral aryl groups, which enables fine-tuning of the absorption spectra and redox properties. The two possible localized forms of 1,5-diaza-s-indacene were compared in terms of their energetic aspects.
Chiral Distorted Hexa‐peri‐hexabenzocoronenes Bearing a Nonagon‐Embedded Carbohelicene
The larger the ring, the better the chiroptical properties: A new family of highly distorted nanographenes is presented incorporating for the first time a nine-membered carbocycle. The nonagon-containing [5]helicene results in an extremely twisted helical moiety and provides the final chiral PAHs with enhanced chiroptical properties.
Abstract
A new family of chiral saddle-helix hybrid nanographenes is reported. The first hexa-peri-hexabenzocoronene (HBC) analogues bearing a nine-membered carbocycle are presented. Furthermore, for the first time, π-extended carbo[n]helicenes containing a nine-membered ring as part of the helical moiety have been synthesized. The combination of a [5]helicene moiety and a nonagon ring in a single chiral motif induces a tremendous distortion from planarity into the nanographenic structures compared to other saddle-helix hybrids such as heptagon- and octagon-containing π-extended carbo[5]helicenes. In fact, the interplanar angle of the two terminal rings reaches the largest angle (134.8°) of a carbohelicene reported to date, thus being by far the most twisted helicene yet prepared. Photophysical properties evaluation showed improved absorption dissymmetry factors (|g abs|=4.2×10−3) in the new family of nonagon-containing π-extended carbo[5]helicenes.
[ASAP] Sulfurane [S(IV)]-Mediated Fusion of Benzynes Leads to Helical Dibenzofurans
[ASAP] A Universal Labeling Strategy for Nucleic Acids in Expansion Microscopy
[ASAP] Heteroaryl–Heteroaryl, Suzuki–Miyaura, Anhydrous Cross-Coupling Reactions Enabled by Trimethyl Borate
Characterization of the 3D microstructure of Ibuprofen tablets by means of synchrotron tomography
Summary
A new methodology to segment the 3D internal structure of Ibuprofen tablets from synchrotron tomography is presented, introducing a physically coherent trinarization for grey‐scale images of Ibuprofen tablets consisting of three phases: microcrystalline cellulose, Ibuprofen and pores. For this purpose, a hybrid approach is developed combining a trinarization by means of statistical learning with a trinarization based on a watershed algorithm. This hybrid approach allows us to compute microstructure characteristics of tablets using methods of statistical image analysis. A comparison with experimental results shows that there is a significant amount of pores which is below the resolution limit. At the same time, results from image analysis let us conjecture that these pores constitute the great majority of the surface between pores and solid. Furthermore, we compute microstructure characteristics, which are experimentally not accessible such as local percolation probabilities and chord length distribution functions. Both characteristics are meaningful in order to quantify the influence of tablet compaction on its microstructure. The presented approach can be used to get better insight into the relationship between production parameters and microstructure characteristics based on 3D image data of Ibuprofen tablets manufactured under different conditions and elucidate key effects on the strength and solubility kinetics of the final formulation.
This article is protected by copyright. All rights reserved
Lay description
A typical formulation of uni‐axial compacted Ibuprofen tablets consist of a mixture of an excipient (microcrystalline cellulose) with an active ingredient (a ground fraction of Ibuprofen). The final mechanical strength of the tablet as well as the release kinetics are strongly influenced by the underlying microstructure, i.e., the spatial arrangement of the microcrystalline cellulose and Ibuprofen within the tablet. In order to optimize the performance of the tablet, it is important to investigate the relationship between its microstructure and the corresponding production parameters. For this purpose, 3D imaging is a powerful tool as it allows computing microstructural properties such as the internal arrangement, interconnectivity and pore location and distribution, characteristics that cannot be computed by experimental characterization techniques.
In the present study, a new algorithm for an accurate trinarization of 3D image data obtained by synchrotron tomography is presented. Trinarization means that we reconstruct microcrystalline cellulose, Ibuprofen and pores on the basis of the 3D images, where one can only observe different greyscale values, but not the different constituents themselves. For this purpose, a hybrid approach combining a trinarization by means of artificial intelligence with a trinarization based on a geometrically motivated algorithm is developed. This hybrid approach allows to compute microstructure characteristics of tablets using image analysis. A comparison with experimental results shows that there is a significant amount of pores below the resolution limit. At the same time results from image analysis lead to the conjecture that these pores constitute the major part of the surface between pores and solid. Moreover, characteristics are computed by image analysis, which are meaningful in order to quantify the influence of tablet compaction parameters on its microstructure. The presented novel approach can be used to elucidate the relationship between production parameters and microstructure characteristics based on 3D image data of Ibuprofen tablets manufactured under different mixing, loading and processing conditions.